Vermicomposting bins vary drastically depending on the desired kind of system.
Small scale
Small-scale systems may use a wide variety of bins. Often, small-scale composters build their own bins. Companies also sell such bins. Commonly, bins are made of old plastic containers, wood, Styrofoam containers, or metal containers.
Some materials are less desirable than others in bin construction. Styrofoam is believed to release toxins into the earthworms' environment[citation needed]. Metal containers often conduct heat too readily, are prone to rusting, and may release heavy metals into compost.
Bins should have holes in the sides to allow air to flow, and a spout that can be opened or closed or holes in the bottom to drain into a collection tray. Plastic bins require more drainage than wooden ones because they are non-absorbent. The design of a small bin usually depends on where an individual wishes to store the bin and how they wish to feed the worms. Most small bins can be grouped into three categories:
Non-continuous – an undivided container. A layer of bedding materials is placed in the bin, lining the bottom. Worms are added and organic matter for composting is added in a layer above the bedding. Another layer is added on top of the organic matter and the worms will start to compost the organic matter and bedding. This type of bin is often used because it is small and easy to build. But it is relatively difficult to harvest because all the materials and worms must be emptied out when harvesting.
Continuous vertical flow – a series of trays stacked vertically. The bottom-most tray is filled first, in a similar fashion to any other bin, but is not harvested when it is full. Instead, a thick layer of bedding is added on top and the tray above is used for adding organic material. Worms finish composting the bottom tray and then migrate to the one above. When a sufficient number of worms have migrated, the bottom tray can be collected and should be relatively free of worms. These bins provide an easier method of harvesting.
Continuous horizontal flow – a series of trays lined horizontally. This method too relies on the earthworms migrating towards a food source in order to ease the process of harvesting. The bin is usually constructed to be similar to a non-continuous bin but longer horizontally. It is divided in half, usually by a large gauge screen of chicken wire. One half is used until it becomes full, then the other half is filled with bedding and organic matter. In time, the worms migrate to the side with the food and the compost can be collected. These bins are larger than a non-continuous system but still small enough to be used indoors, with the added bonus of being easier to harvest.
bravenet.com